Filter
Top Products
www.ironmanfitness.com
Important Information 15Assembly
9
F
D
F1
A33
A34
ASSEMBLY FOR CONSOLE
Step 1:
Connect the sensor wire (A34) and the pulse wire (A33) with the corresponding
wires on the console (F).
Step 2:
Gently push all wires into the upright post and mount the console (F) onto the
console mounting plate at the top of the upright tube (D). Secure with screws
(F1) to keep the console in place.
Note:
Screws (F1) will already be attached on the backside of the console.
Remove before sliding onto console tube.
Use Tool
6mm