Filter
Top Products
5
Assembly: Parts Identifier
The Ironman Edge Treadmill will require assembly before operating. Place unopened box on
a clean, level surface. After opening the box, remove any packing material from the treadmill.
Do not throw away any packing materials until the unit is working properly.
Do not remove unit from box until it has been fully assembled.
Make sure the electrical cord will easily reach an electrical outlet.
If at anytime you need assistance with assembly, call 888-559-8810.
Locate the hardware pack and identify the following parts required for assembly.
Tools:
1. Allen Wrench- 3/16”
2. Allen Wrench- 7/32”
3. Phillips Screwdriver
WASHER
6 PCS
ALLEN BOLT M8*30
2 PCS
ALLEN BOLT M8*15
4 PCS
RIGHT OUTSIDE FENDER
RIGHT INSIDE FENDER
LEFT OUTSIDE FENDER
LEFT INSIDE FENDER
LEFT OUTSIDE HANDLE COVER
RIGHT OUTSIDE HANDLE COVE
R
LEFT UPPER HANDLE COVER
RIGHT UPPER HANDLE COVER
LEFT LOWER HANDLE COVER
RIGHT LOWER HANDLE COVER
PHILLIPS SCREW ST4.2*16
12 PCS