Filter
Top Products
10
Assembly
Step 5
Locate the four fender pieces (A). To install the right fender onto the unit:
Slide the right interior fender piece onto the unit, making sure that all of the bolts from the
treadmill are properly fed into the slots and holes of the fender piece (B).
Line up the two tabs on the bottom of the fender piece with the slots on the treadmill
frame, and press down to secure (D and E).
Locate the right outer fender piece and line up all of the tabs with the slots and holes of the
right interior fender piece and the treadmill frame. Using 4 screws 4.2*13, connect both pieces
together.
Repeat for the left side.
1.
2.
A B
C
D
E
F
Phillips Screw
ST4.2*13