Filter
Top Products
Assembly
8
FIGURE 6
Step 1:
Connect right side Handlebar Joint
Covers to handlebars. Secure with
Screws (J3).
Step 2:
Repeat for left side Handlebar Joint
Cover.
B
Figure 6
FIGURE 7
Step 1:
Remove the Bolts (B7) from the
Central Support Tube (B). Remove the
Screw (F3) from the handlebar clip.
Step 2:
Connect Cables (F5) to Sensor Wires
(B6).
Step 3:
Slide the Handlebars (F) into the
Central Support Tube. Twist the
Handlebars to bring them into the cor-
rect position. Secure Handlebars with
Bolts (B7) and Screw (F3). Note: Be
careful not to pinch the wires.
Figure 7