Filter
Top Products
FIGURE 1
Step 1:
Remove the Bolts (C4), Washers (C5)
and Nuts (C6) from the rear stabilizer.
Using this hardware, attach the rear sta-
bilizer to the main frame.
FIGURE 2
Step 1:
Remove the Bolts (D7), Washers (D8)
and Nuts (D9) from then front stabiliz-
er. Using this hardware, attach the front
stabilizer to the main frame.
Assembly
6
Figure 2
Figure 1
FIGURE 3
Step 1:
Remove the Bolts (B21), Spring
Washers (B14) and Washers (B13) from
the Central Support Tube. Connect
the Lower Cable Assembly (B5) to the
Upper Cable Assembly (A15).
Note: Make sure that cables are not
pinched.
Step 2:
Connect the Central Support Tube (B)
onto the Main Frame (A) using hard-
ware previously removed.
Figure 3