Filter
Top Products
Assembly
7
FIGURE 4
Step 1:
Connect the Cables (B5,B6) to the
Console cables. Slide the Console onto
the Central Support Tube. Secure in
place using Screws (E4).
FIGURE 5
Step 1:
Pull Right Connect Tube (A43). Match
up bolt holes (see Figure 5a). Secure
with Bolt (J1).
Step 2:
Remove the Bolts (G4) from the
Handlebars (G). Slide Handlebar onto
Central Support Tube. Line up bolt
holes (see Figure 5a). Replace hard-
ware.
Step 3:
Repeat Assembly steps for Left side.
Figure 4
Figure 5
Figure 5a