Filter
Top Products
Assembly
7
FIGURE 3
Step 1:
Thread the Right Pedal (31) into the
right crank area of Main Frame (1).
Secure in place by turning it clockwise
to tighten.
Note: Right Pedal (31) is marked with
an “R”.
Step 2:
Thread the Left Pedal (30) into the left
crank area of Main Frame (1). Secure in
place by turning it counter-clockwise
to tighten.
Note: Left Pedal (30) is marked with an
“L”
FIGURE 4
Step 1:
Attach Seat Pad (9) to Seat Post Slider
(3) using four Flat Washers (63) and
four Nuts (62).
Step 2:
Slide Seat Post Slider (3) into Seat
Post (60) and secure using Locking
Knob (36).
Figure 3
Figure 4