Filter
Top Products
Part No 1143214 3 ICCG Bed Rails
4. Install a socket screw into the head end and foot end mounting pins and tighten
securely.
5. Securely tighten the hex bolts and locknuts that secure the pivot brackets to the bed
frame.
6. Repeat STEPS 3-6 for the opposite bed rail.
Installing 6815A, 6816A and 6803A Bed Rails
NOTE: For this procedure, refer to FIGURE 2.
1. Raise the mattress deck to which the bed rail will be attached.
2. Locate the proper mounting holes on the bed to install the bed rails. Refer to Detail “B”
of FIGURE 2.
3. Position the mounting bracket on the mattress deck. Refer to Detail “B” of FIGURE 2.
4. Secure the mounting bracket to the mattress deck with the two hex bolts and locknuts.
5. Install the bed rail to the mounting bracket by sliding the mounting pin of the bed rail
through the pivot tube.
NOTE: Ensure that the release lever is pointing towards the foot end of the bed.
FIGURE 2 Installing 6815A, 6816A and 6803A Bed Rails
Release Lever
(Towards the foot
end of the bed)
Bed Rail
Socket
Screw
Mounting
Bracket
Hex Bolt
Locknut
Mattress
Deck
Attach Head End Crossmember Here
Bed Rail
Mattress
Deck
Mounting
Bracket
Socket Screw
DETAIL “B” - MOUNTING HOLE
LOCATION FOR MOUNTING
BRACKETS
DETAIL “A” - SIDE VIEW OF BED RAIL
Mounting Holes for
Mounting Bracket
Head End
Foot End
Mounting Pin
Crossmember
(Head End Only)
Mounting
Pin
Pivot Tube
Pivot
Tube