Filter
Top Products
STEP 8 (See Diagram 8)
A.) NOTE: Help of another person is strongly recommended for this step. Place the Lifting
Sleeve (#13) in between the two Safety Stop Frames (#16). Align the holes and insert the
Weight Bar (#15) all the way through. Center the bar and use the two M8 x 3/8” Allen Bolts
(#86) on the two Safety Stop Frame to secure the Weight Bar on each side.
B.) Turn the safety catch hook forward on the Lifting Sleeve to secure its position on the
selected holes on the Front Vertical Frames (#2). Attach a Long Olympic Sleeve (#61) to
each end of the Weight Bar. Attach a Spring Clip (#73) to the Sleeve.
C.) Attach six Weight Posts (#14) to the Left & Right Vertical Frames (#3 & 4). Secure each
Weight Post with one M10 x ¾” Allen Bolt (#76) and Ø ¾” Washer (#89).
D.) Attach six Olympic Sleeves (#60) to the Weight Posts. Attach six Spring Clips (#73) to the
sleeves. Insert the Left & Right Bar Holders (#24 & 25), the Left & Right Safety Catches
(#22 & 23) into the selected holes on the Front Vertical Frames.
18