Filter
Top Products
MULTI-PURPOSE BENCH ASSEMBLY INSTRUCTION
Tools Required Assembling the Machine: Two Adjustable Wrenches and Allen Wrenches.
NOTE: It is strongly recommended this machine be assembled by two or more people to
avoid possible injury.
STEP 1 (See Diagram 1)
A.) Attach the Main Frame (#1) to the Front & Rear Stabilizers (#2 & 3). Secure each end with two
M10 x ¾” Allen Bolts (#35) and ∅ ¾” Washers (#41). Attach a Lock Knob (#23) to the hole
underneath the Main Frame.
B.) Slide the Sliding Block (#8) onto the Incline Adjustment Bar (#9). Align the hole then secure it
with a Lock Knob (#23) to hold the Sliding Block in position.
C.) Attach the Incline Adjustment Bar (#9) to the brackets on the Main Frame. Secure each end
with one M10 x 2 ½” Carriage Bolt (#34), ∅ ¾” Washer (#41), and M10 Aircraft Nut (#43).
DIAGRAM 1
19