Filter
Top Products
STEP 2 (See Diagram 2)
A.) Attach the Main Seat Support (#6) to the Base Frame (#2). Secure it with two M10 x 3 ¾”
Carriage Bolts (#37), one 5 ½” Curved Bracket (#12), two Ø ¾” Washers (#40), and two
M10 Aircraft Nuts (#31). Do not tighten the Nuts and Bolts yet.
B.) Attach the Front Post (#9) to the Main Seat Support. Secure it with one M10 x 3 1/8” Allen
Bolt (#35) through upper hole on 4” Curved Bracket (#13), and one Ø ¾” Washer (#40)
into Main Seat Support. Secure with one M10 x 3 1/8” Carriage Bolts (#36), one Ø ¾”
Washer (#40), and one M10 Aircraft Nut (#31) through lower hole on the Bracket.
C.) Securely tighten all Nuts and Bolts.
D.) Attach the end holes on the two Backrest Supports (#8) to the pivot on Main Seat Support.
Secure it with one M12 x 5 7/8” Hex Bolt (#38), two Ø 1” Washers (#41), and one M12
Aircraft Nut (#30). Do not over tighten the Nut and Bolt. Make sure the Backrest
Supports are able to swivel freely.
E.) Place the other end of the Backrest Supports onto the Backrest Adjustment Bar (#7).
DIAGRAM 2
8