Filter
Top Products
STEP 3 (See Diagram 3)
A.) Attach the Backrest Board (#14) to the Backrest Supports (#8). Secure it with four M8 x 1
5/8” Allen Bolts (#32) and four Ø 5/8” Washers (#39).
B.) Place the Seat Pad (#15) onto the seat brackets on Main Seat Support (#6). Secure it with
four M8 x 1 5/8” Allen Bolts (#32), and four Ø 5/8” Washers (#39).
C.) Attach the Arm Curl Pad (#16) to the Arm Curl Stand (#11). Secure it with two M8 x 5/8”
Allen Bolts (#33) and two Ø 5/8” Washers (#39). Insert the Arm Curl Stand into the
opening on Front Post (#9). Use a M10 Lock Knob (#21) to lock the Arm Curl Stand in
position.
DIAGRAM 3
9