Filter
Top Products
ASSEMBLY INSTRUCTION
Tools Required For Assembling the Machine: Two Adjustable Wrenches and Allen
Wrenches. NOTE: It is strongly recommended for two or more people to assemble this
machine to avoid possible injury.
STEP 1 (See Diagram 1)
A.) Do not tighten Nuts and Bolts until instructed to do so.
B.) Attach one Rear Base Frame (#1) to an Upright Beam (#3) from rear. Attach one end of
the Base Frame (#2) to the Upright Beam from front. Align the holes. Secure them
together with three M10 x 3 ¾” Carriage Bolts (#37), three Ø ¾” Washers (#40), and
three M10 Aircraft Nuts (#31). Secure with two M10 x 5/8” Allen Bolts (#34) from inside
of Upright Beam into Rear Base Frame and Base Frame.
C.) Repeat B to install the other side.
D.) Attach the two Bar Catches (#5) and two Long Safety Catches (#4) onto the selected
slots on the Upright Beams.
E.) Insert the Backrest Adjustment Bar (#7) into the selected holes on the two Upright
Beams to obtain the desired Backrest Incline.
F.) Securely tighten all Nuts and Bolts.
6