Filter
Top Products
STEP 2 (SEE DIAGRAM 2)
A.) Attach the Front Stabilizer (#5) to the Main Seat Support (#3). Secure it with two M10 x ¾”
Hex Bolts (#43), four ∅ ¾” Washers (#48), and two M10 Aircraft Nuts (#51). DO NOT
tighten the nuts and bolts yet.
B.) Attach the Main Seat Support (#3) to the Cross Brace (#2). Secure it with two M10 x 2 1/8”
Hex Bolts (#41), one Bracket (#17), four ∅ ¾” Washers (#48), and two M10 Aircraft Nuts
(#51).
C.) Attach one end of Diagonal Support (#4) to the Main Seat Support. Secure it with one M8
x 2 1/8” Hex Bolt (#44), two ∅ 5/8” Washers (#49), and one M8 Aircraft Nut (#52). Attach
the other end to the Front Stabilizer. Secure it with one M8 x ¾” Hex Bolt (#45) and ∅ 5/8”
Washer (#49).
D.) Securely tighten all nuts and bolts previously installed.
DIAGRAM 2
6