Filter
Top Products
STEP 4 (SEE DIAGRAM 4)
A.) Attach the side holes on the Backrest Supports (#14) to the Pivot on the Main Seat
Support (#3). Place the other end rest against the Backrest Adjustment Bar (#9).
B.) Attach the Backrest Board (#19) onto the Backrest Supports. Secure it with four M6 x 1 ½”
Hex Bolts (#47) and ∅ ½” Washers (#50).
C.) Place the Seat Pad (#18) onto the bracket on the Main Seat Support. Secure it with four
M6 x 1 ¼” Hex Bolts (#46) and ∅ ½” Washers (#50).
D.) Attach the Arm Curl Pad (#20) to the Arm Curl Stand (#10). Secure it with two M8 x 5/8”
Hex Bolts (#45) and two Ø 5/8” Washers (#49).
E.) Insert the Arm Curl Stand into the opening on the top of the Front Stabilizer. Use a Lock
Knob (#24) to hold it in position. Remove Arm Curl Handle when doing Leg Developer
exercises.
DIAGRAM 4