Filter
Top Products
ASSEMBLY:
STEP 1:
Attach the REAR STABILIZER (#15) to the
MAIN FRAME (#1). Securely tighten it with two
CARRIAGE BOLTS, WASHERS AND NUTS.
STEP 2:
Insert the computer sensor wire and hand pulse
sensor wire from the MAIN FRAME (#1) through
the COMPUTER POST (#3). Make sure the
wires come out of the post from the top. Slide
the COMPUTER POST into the post holder on
the MAIN FRAME.
STEP 3:
Securely tighten the COMPUTER POST (#3)
with three ALLEN KEY BOLTS.
5