Filter
Top Products
STEP 17:
Push two RUBBER CUSHIONS (#10) into both
side of aluminum track on the MAIN FRAME
(#1).
STEP 18:
Plug the END CAP (#17) into the opening on the
end of aluminum track.
STEP 19:
Attach the LEFT PEDAL STRAP (#11) to the
LEFT PEDAL (#12) (Both Marked “L”).
Connect the LEFT PEDAL to the left crank on
the MAIN FRAME (#1). Thread it into the crank
in the counter-clockwise direction.
Attach the RIGHT PEDAL STRAP (#13) to the
RIGHT PEDAL (#14) (Both Marked “R”).
Connect the RIGHT PEDAL to the right crank on
the MAIN FRAME (#1). Thread it into the crank
in the clockwise direction.
10