Filter
Top Products
With running deck in lowered
position, place
CONSOLE
on upright masts. Slide the
brackets that are underneath
the console into the top holes of
the upright masts.
Place
LOCK WASHER (E)
and
LOCK WASHER (E) and LOCK WASHER (E)
BOLT (D)
into flat side of
BOLT (D) into flat side of BOLT (D)
LEFT
upright
MAST
upright MASTupright
and tighten.
MAST and tighten. MAST
Place
ARC WASHER (F)
and
ARC WASHER (F) and ARC WASHER (F)
BOLT (D)
into curved side of
BOLT (D) into curved side of BOLT (D)
LEFT
upright
LEFT uprightLEFT
MAST
upright MAST upright
and tighten.
MAST and tighten. MAST
Gently lift
RIGHT
side of the
RIGHT side of the RIGHT
console to connect the
CONSOLE
CABLE
. Carefully tuck wires in
CABLE. Carefully tuck wires in CABLE
mast to avoid damage.
NOTE:
Do not pinch console cable or
grip pulse wires.
Repeat steps 2-3 above to
assemble the right side upright
mast and console.
INTRODUCTION
IMPORTANT
PRECAUTIONS
ASSEMBLY
BEFORE
YOU BEGIN
TREADMILL
OPERATION
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
8
A S S E M B LY S T E P 3
A S S E M B LY S T E P 4
A
B
C
A
B
* Be sure to tighten bolts after all are lined up.
BOLT (D)
LOCK WASHER (E)
ARC WASHER (F)
ARC WASHER (F)
CONSOLE CABLE
DO NOT ATTACH
THIS SIDE UNTIL STEP 4
ASSEMBLED IN STEP 3