Filter
Top Products
6
INTRODUCTION
IMPORTANT
PRECAUTIONS
BEFORE
YOU BEGIN
TREADMILL
OPERATION
LIMITED
WARRANTY
TROUBLESHOOTING
& MAINTENANCE
CONDITIONING
GUIDELINES
ASSEMBLY
BEFORE
YOU BEGIN
ASSEMBLY
7
INTRODUCTION
IMPORTANT
PRECAUTIONS
TREADMILL
OPERATION
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
A S S E M B LY
IMPORTANT: READ THESE SAFETY INSTRUCTIONS BEFORE USE!
During the assembly process of the treadmill there are several areas that special attention must be
paid. It is very important to follow the assembly instructions correctly and to make sure all parts are
firmly tightened. If the assembly instructions are not followed correctly, the treadmill could have
frame parts that are not tightened and will seem loose and may cause irritating noises. There should
be no side-to-side play in the console masts or any forward and back play in the console assembly
or handlebars. If there is any play in these areas, the treadmill has not been properly assembled. To
prevent damage to the treadmill, the assembly instructions must be reviewed and corrective actions
should be taken.
UNPACKING
Place the treadmill carton on a level flat surface. It is recommended that you place a protective
covering on your floor. Take CAUTION when handling and transporting this unit. Never open box when
it is on its side. Once the banding straps have been removed, do not lift or transport this unit unless
it is fully assembled and in the upright folded position, with the lock latch secure. Unpack the unit
where it will be used. The enclosed treadmill is equipped with high-pressure shocks and may spring
open if mishandled. Never grab hold of any portion of the incline frame and attempt to lift or move the
treadmill. FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN INJURY!
Before proceeding, find your treadmill’s serial number
and model name located to the left of the on/off
power switch and power cord and enter it in the space
provided below.
ENTER YOUR SERIAL NUMBER AND
MODEL NAME IN THE BOxES BELOW:
SERIAL NUMBER:
MODEL NAME:
* Refer to the SERIAL NUMBER and MODEL NAME when calling for service.
* Also enter this serial number on your Warranty Card.
LED DISPLAY WINDOWS
AUDIO-IN JACK
PULSE GRIPS
SUPPORT BAR
ON/OFF SWITCH
CIRCUIT BREAKER
TRANSPORT WHEEL
IPOD DOCKING STATION
HEADPHONE JACK
POWER CORD
HANDLEBAR
CONSOLE
MOTOR COVER
RUNNING BELT / RUNNING DECK
SIDE RAIL
ROLLER END CAP
CONSOLE MAST
REAR ROLLER
ADJUSTMENT BOLTS
SAFETY KEY PLACEMENT
WATER BOTTLE POCKET
TOOLS INCLUDED
PARTS INCLUDED
c 1 Console Assembly
(located under treadmill deck)
c 2 Console Masts
c 2 Handlebars
c 2 Support Bars
c 2 Water Bottle Pockets
c 6 Hardware Bags
If you have questions or if there are any missing parts, contact Customer Tech Support.
Contact information is located on the back panel of this manual.
For a complete exploded diagram, visit us at www.horizonfitness.com
c Screwdriver
c 5 mm T-wrench
c 5 mm L-wrench
c 8 mm T-wrench
c 1 Safety Key
c 1 Bottle of Silicone Lubricant
c 3 iPod
®
Dock Inserts
c 1 Universal MP3 Player Dock Insert
c 1 iPod
®
Docking Station Rubber Plug
c 1 Audio Adaptor Cable
c 1 Power Cord
FOOT LOCK LATCH
WHEEL LOCK
WARNING
T1201_Rev.1.7.indd 6-7 7/31/08 4:52:29 PM