Filter
Top Products
10
INTRODUCTION
IMPORTANT
PRECAUTIONS
ASSEMBLY
BEFORE
YOU BEGIN
TREADMILL
OPERATION
LIMITED
WARRANTY
TROUBLESHOOTING
& MAINTENANCE
CONDITIONING
GUIDELINES
11
INTRODUCTION
IMPORTANT
PRECAUTIONS
ASSEMBLY
BEFORE
YOU BEGIN
TREADMILL
OPERATION
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
ASSEMBLY STEP 4
CONSOLE MAST
BOLT (I)
SUPPORT BAR
BOLT (I)
15 mm
Qty: 4
HARDWARE BAG 4 CONTENTS :
A Open HARDWARE BAG 4.
B Align SUPPORT BAR with holes in CONSOLE MASTS.
C Insert BOLTS (I) into all 4 holes of the SUPPORT BAR.
NOTE: Look into holes in the right mast before inserting bolts to avoid pinching cables.
D Tighten all console bolts (Step 3) and support bar bolts (Step 4) completely.
ASSEMBLY STEP 3
CONSOLE MAST
ARC WASHER (L)
SPRING WASHER (M)
BOLT (K)
6mm(M8 screw)
f8.2Xf20X1.8t
T-Wrench
M8X1.25PX16L
M8
Z09
Z08
Z07
Connect the Console Cables and fix the console on the top of the
Console Masts.
4PCS
Flat Washer
Step4
1PCS
4PCS
BOLT
4PCS
Spring Washer
FLAT WASHER (B)
CONSOLE MAST
CONSOLE CABLES
SPRING WASHER (H)
BOLT (G)
CONSOLE
DO NOT ATTACH
THIS SIDE UNTIL STEP 3-D
FLAT WASHER (B)
20 mm
Qty: 4
SPRING WASHER (H)
20 mm
Qty: 4
BOLT (G)
20 mm
Qty: 4
HARDWARE BAG 3 CONTENTS :
A Open HARDWARE BAG 3.
B With running deck in lowered position, place CONSOLE on upright masts. Align the brackets
that are underneath the console with the top holes of the upright masts.
C To assemble the LEFT CONSOLE MAST to the CONSOLE, insert 1 BOLT (G), 1 SPRING
WASHER (H) and 1 FLAT WASHER (B) into the 2 holes in the LEFT CONSOLE MAST and
lightly tighten.
D Gently lift RIGHT side of the CONSOLE to connect the CONSOLE CABLES. Carefully tuck
wires in mast to avoid damage. NOTE:
E Repeat STEP C above to attach the RIGHT CONSOLE MAST to the CONSOLE.
F Leave console bolts loose until after step 4 is completed.
* NOTE: Be
careful not to
pinch any
wires while
attaching the
console.
GS_1035T_Treadmill_Rev.2.3.indd 10-11 6/13/07 11:18:42 AM