Filter
Top Products
FOLDING YOUR ELLIPTICAL TRAINER
Note: It is important to always follow the correct order of steps when folding your elliptical trainer.
STEP 1: The first step is to position the elliptical pedal arms in the proper position. The pedal arms
can be positioned in two different positions for convenience. The first position is to rotate the left
pedal arm so that it is in the backmost position (the left pedal arm wheel should be positioned at the
rear of the elliptical trainer). The second position would be to rotate the right pedal arm in the back-
most position.
STEP 2: Carefully raise both the pedal arm (in the backmost position) and guide rail simultaneous-
ly.
STEP 3: Press and hold the lock latch button located underneath the guide rail end cap. Align the
lock latch with the lock latch receiver located underneath the pedal arm. Insert the lock latch receiv-
er into the lock latch. Release the lock latch button once the lock latch is secure.
STEP 4: Repeat process for alternate side.
Note: It is important to always follow the correct order of steps when unfolding your elliptical train-
er.
STEP 1: Firmly grasp both the left pedal arm and guide rail. Press and release the lock latch receiv-
er from the lock latch. Carefully lower the pedal arm and guide rail, standing to the side to avoid
any accidental release of the alternate pedal arm and guide rail.
STEP 2: Repeat process for alternate side.
UNFOLDING YOUR ELLIPTICAL TRAINER
ROUTINE MAINTENANCE
WHAT KIND OF ROUTINE MAINTENANCE IS REQUIRED?
We use sealed bearings throughout our ellipticals so lubrication is not needed. The most important
maintenance step is to simply wipe your perspiration off the trainer after each use.
HOW DO I CLEAN MY HORIZON FITNESS
ELLIPTICAL TRAINER?
Clean with soap and water cleaners only. Never use solvents on plastic parts.
Cleanliness of your elliptical trainer and its operating environment will keep maintenance problems
and service calls to a minimum. For this reason, Horizon Fitness recommends that the following pre-
ventive maintenance schedule be followed.
AFTER EACH USE
Turn off the elliptical trainer with the on/off switch, and unplug the power cord from the wall out-
let. (Horizon E30 only)
WARNING!
To remove power from the elliptical, the power cord must be disconnected from the wall outlet.
(Horizon E30 only)
• Wipe down the elliptical trainer with a damp cloth. Never use solvents, as they can cause damage
to the elliptical.
• Inspect the power cord. If the power cord is damaged, contact Horizon Fitness. (Horizon E30 only)
• Make sure the power cord is not underneath the elliptical trainer or in any other area where it can
become pinched or cut. (Horizon E30 only)
EVERY WEEK
Clean underneath the elliptical, following these steps:
• Turn off the elliptical trainer with the on/off switch. (Horizon E30 only)
• Then unplug the power cord at the wall outlet. (Horizon E30 only)
• Move the elliptical trainer to a remote location.
• Wipe or vacuum any dust particles or other objects that may have accumulated underneath the
elliptical.
• Return the elliptical trainer to its previous position.
EVERY MONTH
• Inspect all assembly bolts and pedals on the machine for proper tightness.
33 HORIZON SERIES 8 HORIZON SERIES
horizon E20_30 owner’s guidev1.2.qxd 10/13/2003 1:24 PM Page 9