Filter
Top Products
SELECTING OPTIONAL FEEDBACK
Press the ‘SELECT’ button on the console to scroll through and view your speed, time, distance, odome-
ter, calories, and pulse.
STARTING YOUR WORKOUT
Start pedaling, the console will automaticlly begin counting down.
FINISHING YOUR WORKOUT
Remember to gradually slow down your pace before stopping your workout. The machine will not
stop moving if you stop your feet abruptly. After you have finished your workout, the console will
‘beep’ several times to let you know your workout is finished.
PROGRAMMING
SCAN FUNCTION
During a workout, you can view alternate information such as speed, distance, calories, accumulated
distance (odometer), and heart rate by pressing the ‘select’ button. To continuously scan through all
alternate readouts, press the ‘select’ button until both scan and time are displayed. This will auto-
matically allow the console to scan through all alternate readouts.
Your elliptical traineris designed to be reliable and maintenance free. However, if you do experi-
ence problems with your elliptical, please reference the troubleshooting guide listed below.
PROBLEM: There is no display on the console.
SOLUTION: Remove the console and verify that the console cable is attached properly, making
sure that the cable is securely inserted into the console.
PROBLEM: The elliptical trainer makes a squeaking or chirping noise.
SOLUTION: Loosen all bolts attached during the assembly process, grease the threads and tight-
en again.
PROBLEM: The resistance levels seem to be incorrect, seeming too hard or too easy.
SOLUTION: Reset the console and allow the resistance to reset to the default position. Restart the
console and retry the resistance levels.
PROBLEM: Roller wheels appear to be leaving particles on the guiderails.
SOLUTION: This is considered normal wear of the elliptical wheels. To remove, simply wipe off the
roller wheels and guide rails with a damp cloth.
PROBLEM: There is no heart rate reading
SOLUTION: If you are using the chest strap, there may be a poor connection between the elec-
trodes and the skin. Remoisten the electrodes with water.
SOLUTION: The chest strap may not be positioned properly. Reposition the chest strap. It may be
necessary to experiment with the fit and position of the chest strap.
SOLUTION: Verify that the distance between the chest strap and the console is not beyond the rec-
ommended range of 36 inches.
SOLUTION: The battery in the chest strap may be dead. Take the chest strap to a jewelry store or
return to Horizon Fitness for a battery replacement.
TROUBLESHOOTING YOUR ELLIPTICAL TRAINER
HEART RATE TROUBLESHOOTING
29 HORIZON SERIES 12 HORIZON E20
horizon E20_30 owner’s guidev1.2.qxd 10/13/2003 1:24 PM Page 13