Filter
Top Products
8
1. Connect the console cable. Carefully tuck
wires in mast to avoid damage.
NOTE: Do not pinch the wires
Assembly Step 4
FINISH
1. Place console assembly into its correct
position.
2. Place Lock Washer (E) and bolt (D) into left
upright support and tighten.
3. Place Arc Washer (F) and bolt (D) into left
upright support and tighten.
4. Repeat STEPS 2 and 3 for the right-side
upright support.
NOTE: Do not pinch console cable or grip pulse
wires.
Assembly Step 3
E
F
D