Healthrider s300i Treadmill User Manual


 
DESCRIPTION OF THE CONSOLE
Refer to the drawing on page 8 to identify the features
described below.
A. Water bottle holder—This holder keeps your water
bottle handy during your workouts (no water bottle
is included).
B. Hand weight holder—These compartments hold the
hand weights.
C. Book holder—This holder allows you to read a book
or enjoy your favorite magazine while you get in
shape.
D. Incline buttons—These buttons control the incline of
the treadmill. The incline range is 1.5% to 10%.
E. Speed buttons and One Touch Speed buttons—
These buttons control the speed of the walking belt.
The speed range is 0.5 mph to 10 mph.
F. Stop buttons—These buttons are used to stop the
walking belt. Note: Pressing either button will stop
the walking belt.
G. Waistband clip—This clip is designed to be worn on
the waistband of your clothes. If the key is pulled
from the console, the walking belt will automatically
stop.
H. Key—This key turns the console on and off.
I. Start button—This button is used to start the walking
belt.
J. Time/Segment Time display—When the manual
mode or the iFIT.com mode is selected, this display
will show the elapsed time. When a preset program
or a pulse program is selected, the display will show
both the time remaining in the program and the time
remaining in the current segment of the program.
The display will alternate between one number and
the other every seven seconds.
K. Calories/Pulse display—This display shows the ap-
proximate number of calories you have burned.
When the optional chest pulse sensor is worn, the
display will also show your heart rate. The display
will alternate between one number and the other
every seven seconds. If the handgrip pulse sensor
is used, the display will show your heart rate contin-
uously while your hands are on the pulse sensor.
L. Distance/Incline display—This display shows the
distance you have walked and the incline level of
the treadmill. The display will alternate between one
number and the other every seven seconds. Note:
Each time the Incline buttons are pressed, the dis-
play will change to show the incline setting.
M. Speed display—This display shows the speed of
the walking belt.
N. Enter button and
and
buttons—These buttons
are used to enter your age when pulse programs
are used.
O. Select Workout button—This button is used to select
the manual mode, the four preset programs, the two
pulse programs, and the iFIT.com mode. Note: If
the walking belt is moving when the Select Workout
button is pressed, the walking belt will slow to a
stop and the displays will be reset.
P. Mode indicators—These indicators show whether
the manual mode, a preset program, a pulse pro-
gram, or the iFIT.com mode is selected.
Q. Program profiles—These profiles show how the tar-
get heart rate will change during pulse programs
and how the speed and incline of the treadmill will
change during preset programs.
Note: The console can display exercise feedback
in either miles or kilometers (see SPEED DISPLAY
on page 11). For simplicity, all instructions in this
section refer to miles.
9