Filter
Top Products
8
10. Make sure that all parts of the exercise cycle are properly tightened. Note: Some hardware may be left
over after assembly is completed. To protect the floor or carpet from damage, place a mat under the exercise
cycle.
9. Identify the Left Pedal (16), which is marked with an
“L.” Using an adjustable wrench, firmly tighten the
Left Pedal counterclockwise into the Left Crank Arm
(22). Tighten the Right Pedal (not shown) clockwise
into the Right Crank Arm. Important: Tighten both
Pedals as firmly as possible. After using the
exercise cycle for one week, retighten the
Pedals. For best performance, the Pedals must
be kept tightened.
Identify the Left Pedal Strap (18), which is marked
with an “L.” Attach the Left Pedal Strap to the Left
Pedal (16). Press the end of the Left Pedal Strap
onto the tab on the Left Pedal. Attach and adjust the
Right Pedal Strap (not shown) in the same way.
22
16
18
Tab
9
8. Attach the Backrest (15) and the Backrest Cover
(77) to the Seat Frame (13) with four 1/4” x 45mm
Screws (55) and four M6 Washers (56).
15
77
13
55
56
8
56
55