Filter
Top Products
8
CONSOLE DIAGRAM
Note: If there is a thin sheet of clear plastic on the
face of the console, remove it.
A. Program ProfilesÑThese profiles show how the
resistance of the elliptical crosstrainer will change
during resistance programs. During the first pro-
gram, for example, the resistance will gradually
increase during the first half of the program, and
then gradually decrease during the last half.
B. MANUAL CONTROL IndicatorÑThis indicator will
light to show when the manual mode is selected.
C. Program IndicatorsÑThese indicators light when a
resistance program is selected.
D. LED MatrixÑWhen the manual mode is selected,
the LED matrix will show your progress on an LED
track. When a resistance program is selected, the
matrix will show your progress and upcoming resis-
tance settings.
E. TIME/DISTANCE/RESISTANCE/LAPS DisplayÑ
This display shows the elapsed time (or the remain-
ing time in a resistance program), total distance,
the resistance level, and the number of 1/4-mile
laps you have completed. The display will change
modes every five seconds. Note: The number of
laps will be displayed only when the manual mode
is selected. The letter ÒLÓ will appear in the display
when the number of laps is shown.
F. SPEED/CALORIES/PULSE DisplayÑ This display
shows your current speed and the approximate
number of calories you have burned. The display
will change modes every five seconds. When the
pulse sensor is used, the display will also show
your heart rate.
G. PROGRAM SELECT ButtonÑThis button is used
to select the manual mode and the resistance pro-
grams.
H. RESISTANCE ButtonsÑThese buttons control the
resistance of the elliptical crosstrainer. There are
ten resistance levels.
I. START/PAUSE ButtonÑThis button is used to start
and pause the console.
J. RESISTANCE DisplayÑThis display shows the
resistance level of the elliptical crosstrainer.
B
C
E
H
F
A
G
I
A
J
D