Filter
Top Products
ADJUSTMENT AND OPERATION
DESCRIPTION OF THE MONITOR
The monitor offers five modes to provide you with
instant exercise feedback:
• Time—Displays
the length of
time you have
exercised. Note:
If you stop exer-
cising for ten
seconds or
longer, the time
mode will pause
until you
resume.
• Reps/Min—Displays your repetitions per minute.
• Reps—Displays the total number of repetitions you
have completed, up to 3999. The display will then
reset to zero and continue counting.
• Calories—Displays the approximate number of
Calories you have burned.
• Scan—Displays all of the above modes, for approxi-
mately 5 seconds each, in a repeating cycle.
HOW TO OPERATE THE MONITOR
1. To turn on the power, press the select button or
simply begin exercising. When the power is
turned on, the time mode will automatically be
selected.
2. Select the desired mode:
Time, reps/min, reps, or calories mode—These
modes can be selected by repeatedly pressing
the select button. The mode indicators will show
which mode has been selected. Make sure that
the scan indicator does not appear.
Scan mode—When the scan mode is selected,
the scan indicator will appear and a mode indica-
tor will show which mode is currently displayed.
The scan mode can be selected by repeatedly
pressing the select button.
3. The monitor has an “auto-off” feature. If the
pedals are not moved and the select button is not
pressed for four minutes, the power will turn off
automatically in order to conserve the batteries.
ADJUSTING THE SEAT
The position of the
seat can be adjust-
ed to accommo-
date different
users. To adjust the
seat, loosen the
knob under the
seat, move the seat
to the desired posi-
tion, and retighten
the knob. To deter-
mine if the seat is
properly adjusted,
sit on the seat and pull the handlebar as close as
possible to your stomach. Your legs should be almost
straight, but your knees should not be locked.
ADDING AND REMOVING WEIGHT FROM THE
WEIGHT TUBE
The AEROBIC
RIDER 2
®
features
a weight bar that
lets you intensify
your exercise by
adding weights. To
add weights, first
remove the weight
collars from the
weight bar. Slide
the desired amount
of weight onto the
weight bar. Secure
the weights with the weight clips. Note: Place an
equal amount of weight on each side of the weight
bar. The total combined weight of the user and
added weights should not exceed 300 pounds.
PROPER EXERCISE FORM
Learning how to properly use the AEROBIC RIDER 2
®
is vital to the success of your exercise program. On
the following pages are photographs of the positions
that you can use to get the maximum benefit from the
AEROBIC RIDER 2
®
.
In addition, we offer the following tips to help you get
the most from your exercise routine:
• Always start each exercise session in the
standard workout position to warm up.
8
Seat
Knob
Weight
Clip
Weight