Filter
Top Products
MAINTENANCE AND TROUBLE-SHOOTING
Inspect and tighten all parts of the AEROBIC RIDER 2
®
by HEALTHRIDER
®
regularly. Keep the monitor out of
direct sunlight or the display may be damaged. The AEROBIC RIDER 2
®
can be cleaned with a soft, damp cloth.
Do not use solvents. Keep liquid away from the monitor. When storing the AEROBIC RIDER 2
®
, remove the bat-
tery from the monitor.
HOW TO REPLACE THE BATTERIES
If the display of the monitor becomes dim, the AAA bat-
tery should be replaced. Remove the battery cover from
the monitor. Remove the old battery. Insert a new battery
into the monitor. Identify the negative (–) and positive (+)
ends of the battery. The spring in the battery compart-
ment should touch the negative end of the battery.
Re-attach the battery cover to the monitor.
HOW TO LUBRICATE THE AEROBIC RIDER 2
®
Every three months, a small amount of light multi-pur-
pose oil should be applied to the AEROBIC RIDER 2
®
.
Apply a few drops of oil between the axle caps or acorn
nuts and the frame in the locations shown at the right.
Make sure to apply oil to both sides of the AEROBIC
RIDER 2
®
.
11
Monitor
Apply Oil
(–)
(+)
Battery
Cover
AAA
Battery