Filter
Top Products
5
1. Before beginning assembly, be sure that you
have read and understand the information on
the previous page.
Attach the Front Stabilizer (28) to the Main Frame
(47) with four M6 X 40mm Bolts (60), eight 1/4” Flat
Washers (57), and four M6 Hex Nuts (2).
2. Attach the Rear Stabilizer (25) to the Main Frame
(47) with two M6 X 40mm Bolts (60), four 1/4” Flat
Washers (57), and two M6 Hex Nuts (2).
3. Lubricate a M8 x 157mm Axle (59). Attach the
Pedal Frame (30) to the Main Frame (47) with the
M8 x 157mm Axle, two M9 Rubber Shield Washers
(58), two 5/16” Washers (55), and two M8 Acorn
Nuts (56).
3
1
57
57
57
57
2
2
60
60
47
28
2
58
58
56
56
55
57
47
Lubricate—59
30
2
47
25
57
57
60