Filter
Top Products
7
9
9. Plug the Power Cord (7) into the jack at the rear of the
MOMENTUM. Make sure to keep the Power Cord
away from walkways and heated surfaces.
10. Make sure that all parts of the MOMENTUM are properly tightened. To protect the floor or carpet from
damage, place a mat under the MOMENTUM.
7
60
12
44
8. Raise the left Pedal Arm (12). Attach a Pedal (60) to
the Pedal Arm with three Black Screws (44).
Attach a Pedal (60) to the right Pedal Arm (not shown)
as described above.
8
7
2
55
1
75
57
57
58
59
58
59
56
56
30
Hole
Tube
62
62
7. Align the indicated holes in the Incline Frame (2) with
the tube on the Base (1). (Note: The Wheels on the
Pedal Arms [not shown] should be on top of the Incline
Frame.) Insert the Incline Axle (75) through the left
side of the Incline Frame, through two Plastic Spacers
(56), through the tube on the Base, through two more
Plastic Spacers, and through the right side of the
Incline Frame. Using two adjustable wrenches, tighten
a 3/8Ó Screw (59), with a Lock Washer (58) and a Flat
Washer (57), into each end of the Incline Axle.
Tap the two Incline Frame Endcaps (55) into the
Incline Frame (2).
Remove the backing from the two Bumpers (62).
Press the Bumpers onto the underside of the Incline
Frame (2) where the Incline Frame touches the front
Stabilizer (30).