Filter
Top Products
6 Forerunner 210 Owner’s Manual
Training
Pairing Your ANT+ Sensor
If your Forerunner does not show
heart rate or foot pod data, you may
need to pair the accessory to your
Forerunner. Pairing is the connecting of
ANT+
™
wireless sensors, for example,
connecting your foot pod with a
Forerunner. After you pair the rst
time, your Forerunner automatically
recognizes your foot pod each time it
is activated.
Before you can pair, you must put on
the heart rate monitor or install the
foot pod. For more information, refer
to the instructions included with your
accessory or refer to the Forerunner
210 Quick Start Manual.
Bring the Forerunner within range
(3 m) of the accessory.
Stay 10 m away from other ANT+
sensors while pairing.
•
If is off, press and hold menu,
and select HR Monitor > On.
If is ashing, from the timer
page, press page to view the heart
rate page.
The Forerunner searches for your
heart rate signal for 30 seconds.
If is off, press and hold menu,
and select Foot Pod > On.
If is ashing, make sure your
foot pod is installed correctly, and
walk around to activate the foot
pod.
If you still cannot pair the
accessory, replace the accessory
battery pages 19–20.
When the accessory is paired, a
message appears, and or
appears solid on the screen.
•
•
•
•
•