9
4. Identify the Left Handrail (71), which is marked
“Left.” Remove the tie from the 5/16" Cage Nut
(33). If necessary, press the Cage Nut back into
place.
Hold the Left Handrail (71) near the Left Upright
(75). Insert the Upright Wire (70) through the
bracket on the bottom of the Left Handrail.
Then, pull the Upright Wire out of the end of the
Handrail.
Attach the Left Handrail (71) to the Left Upright
(75) with three 5/16" x 1" Bolts (7) and three
5/16" Star Washers (8) as shown. Be careful
not to pinch the Upright Wire (70). Start all
three Bolts before tightening them.
Attach the Right Handrail (not shown) in the
same way. Note: There are no wires on the
right side.
71
70
33
4
7
7
8
75
5. Identify the Left Handrail Tube (98), which is
marked “Left.”
Insert the Left Handrail Tube (98) into the top of
the Left Handrail (71). Attach the Left Handrail
Tube with two 1/4" x 1" Screws (9). Start both
Screws before tightening them. Then, insert
a Handrail Insert (69) into the top of the Left
Handrail.
Attach the Right Handrail Tube (not shown)
in the same way.
9
98
5
71
8
Tie
69