Filter
Top Products
10
12. Hold the Dip Arm (11) behind the Backrest Frame
(8) as shown. Attach the Dip Arm to the Backrest
F
rame with two M10 x 100mm Bolts (43) and two
M10 Nylon Locknuts (44).
Do not overtighten
t
he Locknuts; the Dip Arm must be able to
pivot easily.
14. Attach a Dip Handle (12) to the Dip Arm (11) with
an M10 x 50mm Screw (27) and a Dip Cap (48).
Repeat this step on the other side of the Dip
Arm (1
1).
13. Attach the Right Pad Base (26) and an Arm Pad
(25) to the Dip Arm (11) with two M6 x 70mm
Screws (35) and two M6 Washers (36).
Repeat this step on the other side of the Dip
Arm (11).
11
43
44
8
11
26
35
36
36
25
1
1
48
12
27
43
12
13
14