Filter
Top Products
8
5. Apply a portion of the included grease to an
M10 x 165mm Bolt (49). Attach the Backrest
P
ost (15) to the Backrest Frames (16) with the
Bolt, two M10 Washers (52), and an M10 Nylon
L
ocknut (57). D
o not tighten the Nylon
Locknut yet.
Attach the Backrest (19) to the Backrest
Frames (16) with four M6 x 40mm Screws (48)
and four M6 Washers (53). Do not tighten the
Screws yet.
6. Apply a portion of the included grease to an
M10 x 165mm Bolt (49). Attach the Backrest
Frames (16) to the Frame (1) with the Bolt, two
M10 Washers (52), and an M10 Nylon Locknut
(57). Set the end of the Backrest Post (15) in
one of the slots in the Frame.
Do not over-
tighten the Nylon Locknut; the Backrest
Frames must pivot easily.
See step 5. Tighten the M10 Nylon Locknut
(57) and the four M6 x 40mm Screws (48).
Do not overtighten the Nylon Locknut; the
Backrest Post (15) must pivot easily.
7.
Attach the W
eight Tube (24) to the Leg Lever
(5) with an M8 x 70mm Bolt (44), a 13mm x
16mm Spacer (55), two M8 Washers (54), and
an M8 Nylon Locknut (58). Next, press a 25mm
Outer Cap (56) onto the end of the Weight
Tube.
Apply grease to the barrel of an M10 x 77mm
Bolt Set (45). Attach the Leg Lever (5) to the
Front Leg (4) with the Bolt Set. Make sure that
the barrel of the Bolt Set is inserted through
both sides of the bracket on the Front Leg.
5
19
49
52
1
6
53
53
15
52
57
48
48
6
7
16
1
52
15
Slot
52
49
57
4
45
45
Grease
Bracket
5
58
54
55
56
54
44
24
Grease
Grease
Wide End