Filter
Top Products
7
2. Attach the Rear Stabilizer (3) to the Frame (1)
with two M10 x 90mm Carriage Bolts (40) and
t
wo M10 Nylon Locknuts (57). D
o not tighten
the Nylon Locknuts yet.
3. Attach the Seat (18) and the Seat Bracket (8) to
the Frame (1) with two M6 x 80mm Screws (46)
and two M6 Washers (53).
2
1
57
Warning
Decals
3
40
57
3
4. Attach the Frame (1) to the Front Leg (4) with
two M10 x 85mm Bolts (43), two M10 Washers
(52), and an M10 Nylon Locknut (57). Do not
tighten the Nylon Locknut yet.
Finish attaching the Front Leg (4) to the Frame
(1) with four M4 x 19mm Screws (51). Tighten
the Nylon Locknuts (57) used in steps 1, 2,
and 4.
4
1
1
4
51
57
43
52
18
8
46
53
53