Fitness Quest 1800 Treadmill User Manual


 
18
DOT MATRIX: The 8 x 10 dot matrix reflects Incline
on the Elevation Programs (Programs 1-4, 7, 10-11)
and Speed on the Speed Programs (Programs 5-
6, 8-9) and the User Programs. On Programs 12-15
and in the Manual Mode, the dot matrix displays
a 1/4 mile running track.
DISTANCE: Displays the Distance,
in miles or kilometers, the
Treadmill Belt has gone on
the current workout.
SPEED: Displays the Speed
the Treadmill Belt is moving.
PACE: Shows minutes per mile.
INCLINE/PULSE: Displays pulse
rate except when elevation
is changed or SELECT key is
pressed. To get a pulse rate,
place both of your hands
on the Pulse Grip Bars. It is
recommended to straddle
the Walking Belt to get an
accurate reading. If you
are walking or jogging, it is
difficult for the Computer
to accurately read your
pulse rate. (See page 22
for more details.)
Please read carefully before using the Treadmill.
TIME: Shows workout Time. Time begins at 00:00 and counts up.
The maximum time is 99:99. When the Safety Key is first attached
to the Computer, this display shows the accumulated Distance
(odometer) for one second.
1600
DISPLAY FUNCTION
MANUAL
FAT BURN
WALKING INTERVAL
HILL WALK
WALKING
JOGGING INTERVAL
MOUNTAIN PASS
JOGGING
HILL INTERVAL
PIKES PEAK
CARDIO BURN
MOUNTAIN INTERVAL
PROGRAM 4
PROGRAM 8
PROGRAM 1
PROGRAM 5
PROGRAM 9
PROGRAM 2
PROGRAM 6
PROGRAM 10
PROGRAM 3
PROGRAM 7
PROGRAM 11
TARGET DISTANCE
USER 1
TARGET CALORIES
USER 2
TARGET TIME
USER 3
TARGET ELEVATION GAIN
PROGRAM 12
U 1
PROGRAM 13
U 2
PROGRAM 14
U 3
PROGRAM 15
1600
PROGRAM FUNCTION
Odometer: An Odometer showing accumulated distance
will appear in the Time window for one second when the
Safety Key is placed on the Computer.
Time-Out: If the Treadmill is turned on, and the Belt is not
moving, the Computer will shut-off after five minutes.
Re-Start: If the Treadmill is stopped during use,
when the START button is pressed again, the
Treadmill will ramp-up the speed to where it
was stopped. If the Treadmill is stopped for 5
minutes or more, POWER is lost and the
Treadmill will have to be re-started.
CALORIES/HR: During your workout, press Select to
show the Calories you could burn per hour.
ELEVATION GAIN: To display Elevation in feet, the user
has climbed during the current workout, press SELECT
and the value will display for three seconds.
CALORIES: Displays Calories consumed. The Calorie
Calculation is based on a 150 pound person.