Filter
Top Products
8
3. Identify the Left Base Cover (100) and the Right
Base Cover (98).
Slide the Left Base Cover (100) onto the left side
of the Upright (96). Press the Left Base Cover
onto the lower part of the Upright and the left leg
extension assembly (B) until it snaps into place.
Press the Right Base Cover (98) onto the
right side in the same way.
Slide an Upright Cover (129) onto each upright
until it snaps into place. Make sure that the
decal is on the side of the Cover as shown.
100
Decal
3
98
96
B
4. Identify the left handrail assembly (C). Hold
the handrail assembly near the Left Adjustable
Upright (132). Insert the Upright Wire (92)
through the opening on the bottom of the left
handrail assembly.
See the inset drawing. Press the left handrail
assembly (C) onto the Left Adjustable Upright
(132). Be careful not to pinch the Upright
Wire (92). Make sure that the Upright Wire is
resting in the slot at the top of the left Upright.
Attach the left handrail assembly (C) to the Left
Adjustable Upright (132) with two 3/8" x 3 1/4"
Screws (2) and two 3/8" Star Washers (3).
Attach the right handrail assembly (D) to the
Right Adjustable Upright (133) in the same way.
Note: There is no wire on the right side.
132
C
Slot
4
2
D
C
3
2
3
132
133
92
Slot
92
129
129
96