Filter
Top Products
18
960 Sr Owner’s Manual
Basic Operation
• Power On: In the power save mode, press any key or start pedaling to
wake up the console and start operation.
• Reset: To reset a program during its operation, press and hold the
“Stop/Reset”key for 2 seconds. When the program resets, the console returns
to idle mode.
• Pause and Resume: You may interrupt or pause a program for up to 5
minutes during a workout before the console resets. To pause a program,
simply stop pedaling. To resume the program back to the point of where you
left off, either press Start or simply start pedaling.
• Switching a program: The user may switch from current operating
program to another program during its execution by pressing a new program
key and then Enter key to accept the new program. Calories and distance
will continue accumulating from previous program.
o If “Classic Program” or “HR Interactive” program key is pressed during a
program-executing mode, it will enter program-switching mode:
— If Enter key is pressed, it will enter this program setup mode. Age and
weight default will be the last update and time will be the remaining
time of the pervious program.
— If Start key is pressed, the new program will begin, but Warm Up
mode will be skipped.
— If 10 seconds passes and no other key is pressed, the program will
resume back to previous activities.
•
Re-start a program: The user may re-start a program after the program
ends. Simply press”Start” key during Cool Down or Workout Summary mode.
The program will be started right immediately without Warm up. The program
default will remain the same as previous program; the calories and distance
will continue accumulating.
• Level adjustment: During Quick Start, Manual & Interval program, the
user may press Level Up/Down key to adjust the resistance level. (Note:
Resistance adjustments are not allowed in any Heart rate interactive
program).
o If Level Up/Down key is pressed, the level data display will show the
current resistance level and adjust it accordingly. The Dot matrix display
will update the profile as well.
• Difficulty level adjustment: During Random, Hill & Strength profile
program, the user may press Level Up/Down key to adjust the difficulty level.
960SROM1 9/22/06 1:34 PM Page 20