Filter
Top Products
Operation Guide 5182
E-30
After the time setting is the way you want, press 3. A to return to regular
timekeeping.
This will cause the
x x
x
Second Hand to move automatically to 12 o’clock and
resume movement from there.
E-31
To change the current date setting
@
00
50
10
40
20
30
90
60
80
70
Setting the year (tens digit)
Use 1. A as shown under “Setting Modes”
(page E-20) to enter the “Time Setting” mode.
Press 2. C.
The
x
x
Second Hand will move to the tens digit of
the current year setting. This is the year setting
mode.
The year can be set in the range of 2000 to 2099.
x
E-32
@
0
5
1
4
2
3
9
6
8
7
Setting the year (ones digit)
Press 3. D to move the
x
Second Hand clockwise
until it is pointing at the year tens digit you want
to select.
After you select the year tens digit, press 4. C.
The
x
x
Second Hand will move to the ones digit
of the current year.
Press 5. D to move the
x
Second Hand clockwise
until it is pointing at the year ones digit you want
to select.
E-33
@
Dec
May
Jan
Apr
Feb
MarSep
Jun
Aug
Jul
Setting the month
Oct
Nov
After you select the year ones digit, press 6. C.
The x
x
Second Hand will move to the currently
selected month. This is the month setting
mode.
Use 7. D to move the
x
Second Hand to the
month setting you want.
8. After the month setting is the way you want,
press C.
x The
x
Second Hand will move to 12 o’clock,
and the watch will enter the day setting mode.
E-34
Use 9. D (+) and B (–) to change the m
m
Day setting.
If you want to change the time setting at this time, x
press C and then perform the procedure starting
from step 2 under “To change the current time setting”
(page E-27).
After the settings are the way you want, press
10.
A to
return to regular timekeeping.
This will cause the
x
x
Second Hand to move
automatically to 12 o’clock and resume movement
from there.
Note
The watch’s built-in full automatic calendar makes allowances for different month x
lengths and leap years. Once you set the date, there should be no reason to
change it except after you have the watch’s rechargeable battery replaced or after
power drops to Level 3.
@
5
E-35
Using the Stopwatch
The stopwatch measures elapsed time.
Hand Functions
x
Second Hand: Indicates the stopwatch 1/10-second
count.
v
Left Dial Hand:
When you stop an elapsed time measurement
operation, momentarily indicates: the 1/100-second
value (lower dial scale), then the 1/1000-second value
(upper dial scale), then the pointer (
). This cycle is
performed twice and then stops.
b
Right Dial Hands: Indicate the stopwatch minutes and
seconds.
>
@
*
E-36
To perform elapsed time measurement
Use 1. C to rotate the v
v
Left Dial Hand until ST is located next to the pointer ( ).
x This indicates the Stopwatch Mode.
Now you can perform either of following stopwatch operations.2.
x You will not be able to perform any stopwatch operation while the hands are
moving to their initial positions after you enter the Stopwatch Mode.
To perform an elapsed time operation
B
B B B D
Start Stop (Restart) (Stop) Reset
E-37
Note
The Stopwatch Mode can indicate elapsed time up to 23 minutes, 59.999 seconds.
x
In the following cases, the hands of the watch are moving, so pressing x D or B will
not perform any stopwatch operation.
While the hands are moving to elapsed timekeeping after you enter the Stopwatch
−
Mode
While the
− v
v
Left Dial Hand is moving between 1/100-second and 1/1000-second
indications after an elapsed time measurement operation is stopped
While the watch is changing dates at midnight
−
Once you start an elapsed time measurement operation, it continues until you press x
B to stop it or until 24 hours have elapsed (when it stops automatically). Timing
continues even if you exit the Stopwatch Mode or if timing reaches the stopwatch
limit defi ned above.
Whenever you enter the Stopwatch Mode, the hands of the watch move to their x
initial Stopwatch Mode positions. If you did not reset the stopwatch the last time you
used it, the hands will return to the positions they were in the last time you exited
the Stopwatch Mode.
E-38
The x x
x
Second Hand (indicating 1/10 seconds) and
v
Left Dial Hand (indicating
1/100 seconds and 1/1000 seconds) move during the fi rst 30 seconds after
an elapsed time measurement is started or restarted. When the measurement
operation is stopped, they indicate timing results.
Elapsed Time Measurement Results
The hands of the watch indicate the following information in the Stopwatch Mode: x
minutes, seconds, 1/10 seconds (page E-35).
Whenever you stop an elapsed time measurement operation, the x
v
Left Dial Hand
moves to indicate the following for two seconds each.
(1) 1/100 seconds, (2) 1/1000 seconds, (3) Pointer (
− )
The above cycle is performed twice.
To repeat the above cycle, press
− A.
E-39
Example: When the measured elapsed time is 12 minutes, 34.452 seconds
1/100 seconds
2 seconds
1/1000 seconds
2 seconds
*
@>
>
>