Filter
Top Products
Operation Guide 5182
E-20
Setting Modes
The watch has a number of setting modes that you can use to confi gure its settings. In
the Timekeeping Mode, hold down A until the setting mode you want is selected as
described below. Release A when the setting mode you want is selected.
To select a setting mode
Hold down A.
x
x
Second Hand moves to 12 o’clock.
(3 seconds)
@
E-21
x
x
Second Hand moves to 1 o’clock, indicating the Home
City Setting Mode. See “To confi gure summer time and
other Home City settings” (page E-24).
(3 seconds)
x
Second Hand moves to 2 o’clock, indicating the Time
Setting Mode. See “To change the current time setting”
(page E-27).
(3 seconds)
@
@
E-22
x
x
Second Hand moves to 3 o’clock, indicating the Home
Position Adjustment Mode. See “To adjust home positions”
(page E-49).
(3 seconds)
Watch returns to normal timekeeping.
If the
x
x
Second Hand home position is off due to the
watch having been subjected to strong magnetism or
other abnormal treatment, the second hand may point
to other positions than those described in the above
procedure.
@
E-23
Timekeeping
Use the Timekeeping Mode to view the current time and date. To enter the
Timekeeping Mode from any other mode, hold down C at least two seconds.
Hand Functions
z
Hour Hand
x
Second Hand
c
Minute Hand
v
Left Dial Hand: Indicates TM.
b
Right Dial Hands:
Indicate the current time in the World Time City
(page E-40) in 24-hour format.
n
24-hour Hand:
Indicates the current 24-hour timekeeping hour.
m
Day
B +
*> 5
6
@
E-24
Confi guring Home City Settings
There are two Home City settings: actually selecting the Home City and selecting
either standard time or daylight saving time (DST).
To confi gure summer time and other Home City
settings
Note
This watch does not have a city code that corresponds
x
to Newfoundland.
Use 1. A as shown under “Setting Modes” (page E-20) to
enter the “Home City Setting” mode.
The watch will exit the setting mode automatically if
x
you do not perform any operation for about two or
three minutes.
For details about city codes, see the “City Code
x
Table” at the back of this manual.
@
E-25
To change the Home City setting, press 2. D to move the
x
x
Second Hand clockwise.
Press
x D as many times as necessary until the
x
Second Hand is pointing at the city code you want
to select as your Home City.
Holding down
x D causes the
x
Second Hand to move
at high speed.
Each time you change the city code setting, the
x
z
Hour Hand,
c
Minute Hand,
n
24-hour Hand and
m
Day move to the current time and date for that city
code. Do not perform the next operation until these
hands stop moving.
Press 3. B to select STD (standard time) or DST (daylight saving time) for the
currently selected city code.
While you are selecting the Home City code, the
x
v
Left Dial Hand will indicate
the setting (STD, DST) of the currently selected city code.
The following explains each of the available summer time settings.
−
B +
6
@> 5
E-26
STD
With this setting, the watch always indicates standard time. It does
not indicate summer time.
DST
With this setting, the watch advances its time setting by one hour
to indicate summer time (daylight saving time).
Note that you cannot change the summer time setting while x UTC is selected as
your Home City.
After all the settings are the way you want, press 4. A to return to the Timekeeping
Mode.
Note
After you specify a city code, the watch will use UTC* offsets to calculate the World
x
Time based on the current time in your Home City.
Coordinated Universal Time, the world-wide scientifi c standard of timekeeping. The *
reference point for UTC is Greenwich, England.
E-27
Confi guring Current Time and Date Settings
You can confi gure current time and date settings.
To change the current time setting
Use 1. A as shown under “Setting Modes” (page E-20) to
enter the “Time Setting” mode.
The x x
x
Second Hand will move to 12 o’clock. This is
the time setting mode.
@
E-28
In the following steps, each press of x C cycles between settings as shown
below.
Hour/Minute
Year (tens digit)
Day Month
Year (ones digit)
E-29
Use 2. D (+) and B (–) to change the time (hour and
minute) setting.
Each press of either button will move the hands
x
(z
z
Hour Hand and
c
Minute Hand) one minute.
Holding down x D or B will start high-speed
z
Hour
Hand and
c
Minute Hand movement in the applicable
direction. To stop high-speed hand movement, press
any button.
The x
n
24-hour Hand and
z
Hour Hand move in sync
with each other.
When setting the time, make sure that the
x
n
24-hour
Hand indicates the proper a.m./p.m. hour.
If you want to change the date setting at this time,
x
press C and perform the procedure starting from
step 3 under “To change the current date setting”
(page E-31).
B +@
6