Filter
Top Products
E-57
1. Enter the Data Recall Mode (page E-11).
2. Use the C button to cycle between the altitude records, current Altimeter
Mode stopwatch record, and the historical record.
3. When the record you want is displayed, use the E (+) button and B (–)
button to scroll through its data. Holding down the E or B button scrolls
data at high speed.
4. After you are finished viewing data, press D to exit the Data Recall Mode.
• Dashes (xxxx) will be displayed if data has been deleted or if there is no
corresponding data due to error, etc. In such cases, total ascent (ASC)
and total descent (DSC) values will show zero.
• When total ascent (ASC) or total descent (DSC) exceeds 99,995 meters,
the applicable value will restart from zero.