Filter
Top Products
E-25
To perform manual receive
1. Enter the Receive Mode (page E-10).
2. Place the watch on a stable surface so its 12
o’clock side is facing towards a window (page
E-16).
3. Hold down A for about two seconds until RC
starts to flash on the display.
• Time calibration signal reception takes from
two to seven minutes. Take care that you do not
perform any button operations or move the
watch during this time.
• If the receive operation is successful, the
reception date and time appear on the display,
along with the GET indicator.
The watch will enter the Receive Mode if you
press A or if you do not perform any button
operation for about one or two minutes.
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
Receiving
Receive successful