Filter
Top Products
7
GETTING STARTED
INSERTING THE BATTERY
Remove the battery compartment cover (Figure 1.1) by loosening the battery compartment locking
screw with a coin. Insert one CR-2 3-volt lithium battery with polarity (+ and -) as indicated inside
the compartment. Replace the battery compartment cover and secure by tightening the battery
compartment locking screw.
Note: The battery will provide approximately 5,000 ranges. Remove the battery from the riflescope if
it is not going to be used for longer than one month.
(Figure 2) Infrared Remote Trigger Pad