Bushnell 20-4124 Hunting Equipment User Manual


 
19
maximum distance needed. Measure the bullet drop at each distance and then convert the drop into moa.
Multiply the moa by 4. Using this number, count the number of tick marks on the dial and mark the distance.
Example: Suppose you have a bullet drop of 9 inches at 300 yds. This is a drop of 3 moa. Since the
clicks are ¼ moa, the drop for 300 yds would be 12 tick marks.
USING MIL DOTS
Your new Bushnell
®
YARDAGE PRO
®
LASER RANGEFINDER RIFLESCOPE contains a mil-dot
reticle. Since the riflescope already contains an integrated laser rangefinder, it is not likely that you will
If Bullet Drop is: @300 yds @300 m @500 yds @500 m
Use:
A 25-31 inches 63-79 cm 114-146 inches 291-370 cm
B 20-25 inches 50-63 cm 88-114 inches 225-291 cm
C 16-20 inches 40-50 cm 72-88 inches 182-225 cm
D 13-16 inches 34-40 cm 61-72 inches 155-182 cm
E 12-13 inches 30-34 cm 55-61 inches 139-155 cm
F 10-12 inches 25-30 cm 47-55 inches 119-139 cm
G 8-10 inches 20-25 cm 39-47 inches 99-119 cm
H Less than 8 inches Less than 20 cm Less than 39 inches Less than 99 cm