Filter
Top Products
Fitting the Helmet to Your Head
In order for your Bell helmet to work correctly, it must fit and be worn correctly.
Follow these five simple steps to learn how to properly fit and wear your helmet.
You will need a mirror.
STEP 1: Wear Your Helmet in Its Proper Position
Always wear the helmet low in the front to protect the forehead (Figure 1a). Never
wear the helmet tipped back to expose your forehead (Figure 1b).
IMPORTANT: All fitting adjustments MUST be made with the helmet in the proper
position. Failure to do so will result in a poor fit. This will allow the helmet to move
out of position or come off in an accident.
STEP 2: Adjust the Straps
To adjust the position of the straps:
1. Open the Cam-Lock adjustors (Figure 2). Put the helmet on and slide the straps
through the adjustors until they are located in the correct position as indicated
in Figure 3.
2. Make sure there is no slack in any of the straps when the adjustors are
positioned correctly.
3. Close and lock the Cam-Lock adjustors.
The front and rear straps should join at a point slightly below and in front
of (but not covering) the ears (Figure 3).
2
ENGLISH
Figure 2
Figure 3
Figure 1a Figure 1b