Barnett Engineering RX150 Hunting Equipment User Manual


 
14
CARE AND MAINTENANCE
Care of String
The owners kit contains a tube of lube wax that should be
applied to the center serving and flight track every 5 – 10
shots. If the crossbow has been exposed to excessive moisture
you may need to apply wax sooner.
Apply lubewax to the center serving of string, rolling string
forwards and backwards to ensure even application of wax.
Apply lubewax to the flight track in order to extend string life
and reduce friction.
Keeping your Crossbow Peak Condition/Maintenance
Always store your crossbow in a safe, dry place.
Do not expose your crossbow to extreme heat, such as
closed, hot vehicles or near heat sources.
Inspect string for signs of wear. String showing wear
should be replaced immediately.
Periodically put a few drops of quality lightweight
machine oil in the trigger mechanism.
Keep the flight track and the string serving waxed,
reducing friction.
Your prod can be left strung indefinitely although we do
not recommend that the bow be left in the cocked
position for periods longer than four hours.
When storing the crossbow for a long period of time it is
recommended that the prod be unstrung.
With reasonable care of your equipment and diligent practice,
your Crossbow will remain an accurate, highly efficient hunting
weapon.