Filter
Top Products
13
String Fraying
1. Are you using Barnett lubewax on the center string
serving and every 5-10 shots and on the flight track
when needed?
2. Keep the trigger mechanism and flight surface free of
obstruction.
3. Check for metal burrs on the flight track and arrow end
caps.
Limb Weak or Losing Power
1. Has the crossbow been dry fired? (This may cause the
limb to crack)
2. Inspect the limb for splits or cracks.
3. Are you using a Barnett string? (The proper length.)
Helpful Information
• Use Barnett’s 16” Aluminum arrows with offset, straight
or helical fletch and moon nock.
• Recommended broad heads – Any three blade low
profile broad head with a cutting diameter no more than
1 ½”.
• Mechanical broad heads that simulate the flight of a field
point may be used where legal.
• When using broad heads, the blades must be aligned
with arrow fletching. This can be done by placing a
rubber o-ring between the broad head and the arrow
front insert.
IMPORTANT
Because of the power of the Rx150 Crossbow and the
inconsistent properties of wooden shafts, which have a
tendency to warp, vary in spine stiffness; density; moisture
absorption, all of which result in inaccuracy. Barnett
International DOES NOT RECOMMEND their use under any
circumstance.