Filter
Top Products
14
© Adam Equipment Company 2012
6.7 SETTING
DATE
AND
TIME
F7
F7F7
F7
D
DD
D
-
--
-
T
TT
T
1) Switch on the scale then press the [kg/lb] key during the self-checking test of
the display.
2) The display will show the first function
F1
F1F1
F1
EL
ELEL
EL
..
3) Press the [kg/lb] key to select
F7
F7F7
F7
D
DD
D
-
--
-
T
TT
T
and then [Zero] to enter the date setting
display.
4) The display will show the day, month and year.
5) To change any setting press the [kg/lb] key to increment the flashing digit and
either the [Print] or [Clear] key to move the flashing digit to the left or right.
6) Press the [Zero] key to save the date and enter the time setting parameter
7) To change the time press the [kg/lb] key to increment the flashing digit and
either the [Print] or [Clear] key to move the flashing digit to the left or right.
8) Press [Zero] to save, [cm/ft] to exit then [kg/lb] to select the next parameter.
6.8 SET
UP
F8
F8F8
F8
SET
SETSET
SET
UP
UPUP
UP
Four performance parameters, Filter, Auto Zero, Stability and weight tracking are
available to the USER.
These parameters influence the speed of the display update and have been factory
set, the default settings should normally be used to optimise performance.
Available parameters and settings are as below.
PARAMETER
DESCRIPTION DEFAULT VALUE
FILT
Filter settings of 1- 6 are available
1 is the fastest filter, 3 is the slowest.
6
ZERO
Automatic Re-zero range
Settings of 1 to 6 are available
2
STA
Stability symbol range
Settings of 1 to 6 are available
1 is the smallest stability range and 6 is the largest.
6
ZTR
Weight Tracking Range
Settings of 1 to 6 are available
4