Filter
Top Products
11
© Adam Equipment Company 2012
6.2 SETTING
AUTO
OFF
F2
F2F2
F2
OFF
OFFOFF
OFF
An automatic power down time can be set so that the MUW turns off after a period
where no activity is detected. This preserves the life time of the battery when used
in this mode.
Settings are OFF, 5, 10, 20, and 30 minutes.
1) Switch on the scale then press the [kg/lb] key during the self-checking test of
the display.
2) The display will show the first function
F1
F1F1
F1
EL.
EL.EL.
EL.
3) Press the [kg/lb] key to select
F2
F2F2
F2
OFF
OFFOFF
OFF
and then [Zero] to enter and show the
current setting, default is 10.
4) Press the [Print] key to change the setting for the backlight and press [Zero]
to save, then [kg/lb] to select the next parameter.
6.3 SETTING
THE
PRINTING
CONTROLS
F
FF
F3
33
3
SE
SESE
SE
R
RR
R
The MUW can be set to automatically print “AUTO”, or print on demand “PrN” by
pressing the [Print] button.
The data transmission speed “Bps” of the MUW must match that of the Printer or
other device being used to collect data information successfully.
The printing control and speed can be selected as follows.
1) Switch on the scale then press the [kg/lb] key during the self-checking test of
the display.
2) The display will show the first function
F1
F1F1
F1
EL.
EL.EL.
EL.
3) Press the [kg/lb] key to select
F
FF
F3
33
3
S
SS
S
ER
ERER
ER
and then [Zero] to enter and show the
current printing control setting “UArt”.
4) Either printing on demand (PrN), pressing the [Print] key following a weighing,
or printing automatically (AUTO), automatically prints out when a stable
reading and BMI calculation is displayed can be selected.