Filter
Top Products
12
© Adam Equipment Company 2012
5) Press the [Print] key to change the setting for the printing control and press
[Zero] to save.
6) The current setting for data transmission speed “Bps” will now be displayed.
600, 1200, 2400, 4800, 9600 are available. Default is 9600.
Press the [Print] key to change the setting and press [Zero] to save.
Test will be displayed, press the [Print] key to send a test print command.
7) Press [Zero] to save, [cm/ft] to exit, then [kg/lb] to select the next parameter.
6.4 PRINTING
DETAIL
CONTROL
F
FF
F4
44
4
P
PP
P
T
TT
T
S
SS
SE
EE
EL
LL
L
The MUW can be programmed to provide a customised print out to give you the
readings you require. Doctor, patient, DiSP1, DiSP2, DiSP3 details can all be enabled
or disabled to suit the information you need to see.
1) Switch on the scale then press the [kg/lb] key during the self-checking test of
the display.
2) The display will show the first function
F1
F1F1
F1
EL.
EL.EL.
EL.
3) Press the [kg/lb] key to select
F4
F4F4
F4
P
PP
P
T
TT
T
S
SS
SE
EE
EL
LL
L
and then [Zero] to enter and show the
current settings.
SETTING DESCRIPTION SELECTIONS
dr.Id
Doctors Id number
ON/OFF
PAt.Id
Patient Id number
ON/OFF
DiSP 1
Display 1 shows the weight of the patient
ON/OFF
DiSP 2
Display 2 shows the height of the patient
ON/OFF
DiSP 3
Display 3 shows the BMI of the patient
ON/OFF
CAL
Print out following calibration
ON/OFF
d-t
Date and time
ON/OFF
4) Press the [Print] key to change the setting for the printing detail control and
press [Zero] to save.
5) Press the [kg/lb] key to exit and continue.